Ducati, Suzuki and Yamaha Decals and Graphics
Honda Decals Yamaha Decals Suzuki Decals Yamaha R6 Decals Yamaha R1 Decals Honda Models Honda Decal Suzuki Decal
 
 

How to peel decals
Motorbike Bookshop
Yamaha YZ and YZF Information
Honda Specifications
Suzuki Model Guide
Yamaha Model Guide
Browse our catalog
Illustrated Catalog Pages
Company Policy
Browse the Decals
 
- Racebike Decal Kits
- Race Number Decals
- Wheel Rim Decals
   Aprilia Sponsor Sets
- Ducati Customers Bikes
- Manufacturer Decals
- Ducati Books
- Ducati Decal Sets
   Ducati Sponsor Sets
   748
   749
   749R
   888
   916
   996
   998
   999
   999R
   Performance
   ST2
   ST4
   ST4s
   Superlight
   Supersport 600
   Supersport 750
   Supersport 900
- Honda Customers Bikes
- Honda Books
- Honda Decal Sets
   Honda Sponsor Kits
   600RR
   900RR
   929RR
   954RR
   AX Series
   Blackbird
   CB Series
   CBR 250RR
   CBR Series
   F2
   F3
   F4
   F4i
   Fireblade
    1992 Fireblade
    1993 Fireblade
    1994 Fireblade
    1995 Fireblade
    1996 Fireblade
    1997 Fireblade
    1998 Fireblade
    1999 Fireblade
    2001 Fireblade
   General
   Hurricane
   Interceptor
   MT Series
   MTX Series
   Nighthawk
   NSR Series
   RC-30
   VF Series
   VFR Series
   VTR Series
   Wings
   XR Series
- Kawasaki Customers Bikes
- Kawasaki Books
- Kawasaki Decal Sets
   Kawasaki Sponsor Sets
   GPZ550
   GPZ750
   GPZ900
   GPZ1000
   GPZ1100
   GPX
   KL Series
   KLR Series
   Z 1000
   Z750
   ZR-7
   ZR-7S
   ZX-10
   ZX6R
   ZX7R
   ZX9R
   ZX11
   ZX12R
   ZZR600
   ZZR1100
- Suzuki Customers Bikes
- Suzuki Books
- Suzuki Decal Sets
   Suzuki Sponsor Sets
   Bandit 400
   Bandit 1200S
   Bandit N1200
   Bandit S600
   GSX Series
   GSXR-600
   GSXR-750
   GSXR-1000
   GSXR-1100
   Hayabusa
   Katana 600
   Katana 750
   Katana 1100
   RGV Series
   SV Series
   TL1000S
   TL1000R
   VX Series
- Yamaha Customers Bikes
- Yamaha Books
- Yamaha Decal Sets
   Yamaha Sponsor Kits
   FJ Series
   FZR600
   FZ 750 1985
   FZ 750 1986
   FZR 750 1990
   FZR1000
   FZS600
   R1
   R6
   R7
   RD Series
   RZ Series
   Thundercat
   TZR Series
   XJ Series
   XT 350 Series
   XT 600 Series
  • Pocket Bike
       DUCATI
       HONDA
       KAWASAKI
       SUZUKI
       YAMAHA
       STRIPES
  • INFORMATION
     Honda VF VFR Bikes
     Honda CBR 900 Fireblade
     Yamaha R1
     Yamaha R6
     Yamaha R7
     Yamaha Racing
     
     Fitting your decals
    Honda Decal
    Suzuki Decal
    HondaDecal


    All transactions are
    Secure
    Thwate SSL 

     

    honda decals.com

     
    Honda CBR 1100XX Super Blackbird
    Instructions

    Instruction for fitting Decals.

     

    Fitting Decals Wet method

    1.             All screen decals must be placed on the inside unless stated otherwise.

    2.             Fit the decal in a warm environment.

    3.             Clean the surface where the decal is to be fitted thoroughly with soapy water  (ensure that the cleaner does not damage paintwork. it is important that there is no wax or grease on the surface)

    4.             Place the decal on the surface and hold in place with a piece of masking tape on one edge so that you can still lift the decal from the surface

    5.             Carefully peel off the backing that is next to the surface that the decal is to be applied to

    6.             Spray a mild mixture of soap and water on the area the decal is to be applied this will help stop air bubbles and allow you to position the decal accurately

    7.             Lay the decal onto the surface, slide it into the position you require it and with a credit card, starting at the middle work out all the liquid

    8.             Leave to dry for 12  to 24  hours longer if the temperature is lower than 60 degrees

    9.             Carefully remove the masking tape and the decal backing ensuring the decal does not come off with the backing. Do this slowly.

    10.           Do not wash the area vigorously for a couple of weeks

     

    Fitting Decals Dry  method

    6.        For optimum results, surface temperature should be above 50°F and below 90°F. If necessary, move vehicle to a location where the temperature can be within the installation guidelines. You will need a ruler, masking tape, scissors, lint free cloth, a surface cleaner(isopropyl alcohol is recommended) and a slip solution is optional for larger graphics

    7.        After determining the location for your graphic, clean the surface with a lint free cloth and cleaner solution. Be sure to turn the cloth several times to insure thorough cleaning and wax removal. After doing this you should get a "squeaky" sensation when lightly dragging your fingers across the surface.

    8.        Using small strips of masking tape, locate where the graphic is to be installed. If the graphic has a horizontal edge or reference point, you can use this for measuring the location from a body line or trim moulding. If the decal has a flowing design, you'll have to step back and visually inspect its location to determine if that is where you want it. Once this is done, make measurements from individual points on the design and transfer the locations to the opposite side of your vehicle. (This is the step you need to take your time on, measure from different locations, once the graphic is installed, it cannot be moved).

    9.        Place two strips of masking tape (slightly overlapping each other) vertically in the approximate centre of the graphic. This is known as the "hinge" method. This will allow you to install half of your decal at a time.

    10.     Remove the masking tape strips from one end of the decal and slowly peel the backing paper away, taking care not to touch the adhesive side of the graphic. Use scissors to remove the backing paper and discard.

     

    To remove a decal

    1.             Use a heat gun to warm the decal and peel it off gently

    2.             To remove any additional glue use rubbing alcohol or similar compound (ensure that this does not mark the paintwork)

     

    If you require extra letters due to accidental damage, theft, and vandals or for any reason email me at [email protected] and we will be pleased to help you.

     

    If this product arrives damaged in transit, please repack it into a suitable envelope and return it to us for a replacement. If you send us photos of the decals fitted you will get free shipping on your next purchase.

    If you have a problem with the size of a decal email us with the size you need & the year and model of the vehicle

    If you need a standard decal or decal set  we do not have, if you provide the dimensions and an image we will make this for your at half price.  All decals supplied by us can be clear coated but have an excellent life if they are not.

    Copyright 2023(c) Bike-decals.com